Remedy
1. Check parameter settings. 2. Reset error. 3. Execute "Save user data" 0x2022:003 (P700.03) or "Save OEM data" 0x2022:006 (P700.06) device command.
Cause
The parameter settings saved in the memory module do not match the inverter hardware.
Description
EPM data: new firmware type detected
Keypad display
UserCU not match
Fault message ID
30354
Severity/response
Fault
- The data have been loaded into the RAM memory without being modified, and they are compatible.
- The settings loaded must be accepted by the user (see remedy).
Product categories