Remedy
- Check drive dimensioning.
- Check settings for the brake energy management. Note: The error status will be reset if the thermal load falls below the error threshold - 20 %.
Cause
The calculated thermal load of the brake resistor has reached the error threshold set in 0x2550:009 (P707.09). The regenerative energy is too high.
Description
Fault - Brake resistor overload
Keypad display
BrkResistor OL.F
Fault message ID
65282
Severity/response
Fault (configurable)
- The event can only be reset after a blocking time. Setting parameters: 0x2550:011 (P707.11)
Severity/response - 1
Blocking time: 2 s
Product categories