Remedy
- Check drive dimensioning.
- Check settings for the brake energy management. Note: The warning status is reset if the thermal load falls below the warning threshold of - 20 %.
Cause
The calculated thermal load of the brake resistor has reached the warning threshold set in 0x2550:008 (P707.08). The regenerative energy is too high.
Description
Warning - Brake resistor overload
Keypad display
BrkResistor OL.W
Fault message ID
65334
Severity/response
Warning (configurable) Setting parameters: 0x2550:010 (P707.10)
Severity/response - 2
Setting parameters: 0x2550:010 (P707.10)